KIT REPAIR REAR WHEEL CYLINDER FRANCE
Rear wheel cylinder repair kit 3/4"
For 9" drum brakes
Professional repair kit for overhauling rear wheel cylinders with 3/4" bore. This set contains all essential wear parts to renovate a leaking or worn wheel cylinder without replacing the complete cylinder.
|
Bore 3/4" (19 mm) |
Position Rear left or right |
|
Brake system 9" drum brakes |
Kit contents Rubber boots, piston springs, seals |
Features
- Complete overhaul kit for one wheel cylinder
- For wheel cylinders with 3/4" bore
- Contains rubber dust boots and cups
- Cylinder spring included
- Suitable for left or right side
★ Quality aftermarket repair kit for renovating rear wheel cylinders on vehicles with 9" drum brakes. Prevents costly replacement of complete cylinders when overhauled in time.
Application
Suitable for civilian and military jeeps with 9" drum brakes and 3/4" rear wheel cylinders. Fits CJ-2A (1946-1949), CJ-3A (1949-1953), M38 (1950-1952) and CJ-3B models with original brake configuration.
Installation notes
Before fitting, check that the cylinder bore is smooth and undamaged — deep grooves or pitting corrosion require replacement of the complete cylinder. Clean all components thoroughly with brake cleaner. Lightly lubricate rubber parts with fresh brake fluid before assembly. Bleed the brake system completely after installation.
Compatibility
This kit fits ONLY wheel cylinders with 3/4" bore at the rear. Front wheel cylinders on the same vehicles have a 1" bore and require a different repair kit. Always check the bore of your wheel cylinder before ordering.
Historical context
The 3/4" rear wheel cylinder was standard on virtually all civilian and military jeeps with the 9" brake system from the early 1940s through the 1950s. This was a proven configuration with larger front cylinders (1") for optimal brake force distribution.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Willys MB (early) | 1941, 1942 |
| Willys MB | 1942, 1943, 1944, 1945 |
| Ford GPW | 1942, 1943, 1944, 1945 |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
| CJ series | |
| Jeep CJ-2A | 1945, 1946, 1947, 1948, 1949 |
| Jeep CJ-3A | 1949, 1950, 1951, 1952, 1953 |
| Jeep CJ-3B | 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |