ECCENTRIC BRAKE SHOE SCREWS
WOA754
Eccentric brake shoe adjusting bolts
For 9" drum brakes
Eccentric adjusting bolts for setting the upper section of the brake shoes on 9" drum brakes. These bolts enable precise adjustment of the brake shoes for optimal braking performance. Their eccentric design allows the brake shoes to be positioned accurately in relation to the drum.
|
Material Steel |
Application 9" drum brakes |
|
Quantity required 2 per wheel (8 per vehicle) |
Fitting Brake backing plate upper section |
Features
- Eccentric design for precise adjustment
- For the upper section of the brake shoes
- 2 pieces per wheel required
- Replacement for corroded original bolts
- Suitable for 9" drum brakes
★ Replace worn or seized adjusting bolts in good time — correct brake adjustment is essential for safe braking performance.
Application
Suitable for vehicles with 9" drum brakes as listed in the product category: CJ-2A (1945-1949), CJ-3A (1948-1953), CJ-3B (1953-1964) and M38 (1950-1952).
Installation notes
The eccentric bolts are located on the upper section of the brake backing plate. Turning the bolt pushes the brake shoe inwards or outwards. After adjustment, secure with the corresponding nut and lock washer. Regular readjustment is necessary as the brake shoes wear.
Compatibility
Please note: these bolts are specific to 9" brakes. Not suitable for later 10" or 11" brake systems which use a different adjustment method (star wheel adjuster).
Historical context
Eccentric adjusting bolts were the standard adjustment system on early Willys and Jeep drum brakes. This system was replaced in later years by the star wheel adjuster type with a rubber plug.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : BOLTS 12 BRAKES, BRAKES WHEEL CJ2A, BRAKES WHEEL 1 CJ3A, BRAKES WHEEL M38, BRAKES WHEEL 1 CJ3B
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Willys MB (early) | 1941, 1942 |
| Willys MB | 1942, 1943, 1944, 1945 |
| Ford GPW (early) | 1942 |
| Ford GPW | 1942, 1943, 1944, 1945 |
| Hotchkiss M201 (early) | 1956, 1957, 1958, 1959 |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
| Willys M38 | 1950, 1951, 1952 |
| CJ series | |
| Jeep CJ-2A | 1945, 1946, 1947, 1948, 1949 |
| Jeep CJ-3A | 1949, 1950, 1951, 1952, 1953 |
📐 Diagrams & technical drawings
From the original Technical Manual CJ2A_PL_1949 — Parts List — only for Willys CJ-2A / CJ-3A (1949)
