GAS TANK SENDING UNIT 6 OR 12-VOLT 46-53 CJ MODELS
Compatible with 6, 12 or 24 Volts.
Fuel Level Gauge
Compatible with 6, 12 or 24 volt systems
Replacement fuel level gauge for historic military vehicles. This gauge operates on the basis of variable resistance from the tank sender and is universally suitable for different voltages.
|
Type Variable resistance |
Voltage 6V, 12V or 24V |
|
Mounting 52 mm dashboard |
Connections IGN, S, earth |
Features
- Compatible with 6, 12 or 24 volt systems
- Works with variable resistance tank sender
- Mounting in 52 mm dashboard aperture
- Connections: IGN (power supply), S (sender), earth via housing
- Black dial with white needle
★ This fuel gauge only functions correctly when both the gauge and the tank sender are properly earthed. With rubber tank mountings, an additional earth cable from tank sender to chassis may be necessary.
Installation notes
Always check the earth connections of both the fuel gauge and the tank sender for correct operation. When using rubber tank fixings that isolate the sender from the chassis earth, an additional earth cable must be installed from the sender housing to the chassis frame. Connection: IGN terminal to 6V/12V/24V power supply via dashboard (from ammeter), S terminal to tank sender, earth via gauge housing.
Compatibility
This gauge is suitable for systems with variable resistance tank senders as used on WWII military vehicles. Works with 6 volt, 12 volt and 24 volt electrical systems. Check before fitting whether your tank sender is compatible with the resistance range of this gauge.
Historical context
During WWII, fuel gauges from manufacturers such as Stewart-Warner and King-Seeley were used on military jeeps. These gauges operated on the basis of variable resistance in the tank sender, a robust system suitable for military applications.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : FUEL TANK - CJ3B
This part fits:
| Model | Years |
|---|---|
| CJ series | |
| Jeep CJ-2A | 1945, 1946, 1947, 1948, 1949 |
| Jeep CJ-3A | 1949, 1950, 1951, 1952, 1953 |
| Jeep CJ-3B | 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual CJ2A_PL_1949 — Parts List — only for Willys CJ-2A / CJ-3A (1949)
