HOSE AIR TUBE TO CARB 24 VOLTS
Air filter to carburettor hose – 24 volt
For modified air filter configuration
Rubber hose for the connection between air filter and carburettor on vehicles with 24 volt electrical installation. During the 24V conversion, the voltage regulator was placed at the original air filter position, requiring the air filter to be relocated to a new position between radiator and carburettor.
|
Material Rubber |
Application 24 volt system |
|
Type Air intake hose |
Configuration Modified air filter system |
Features
- Suitable for modified 24V air filter configuration
- Connects air filter to carburettor
- Replacement part for modified configurations
- Rubber construction for airtight connection
- Resistant to engine bay conditions
★ Essential component when converting to 24 volt electrical system where the air filter configuration was modified.
Application
This hose is used on vehicles where the original air filter configuration was modified for 24 volt electrical systems. In this modification, the second voltage regulator took the place of the original air filter on the firewall, requiring the air filter to be relocated to a position closer to the radiator with direct connection to the carburettor.
Installation notes
Note: during fitting, it may be necessary to warm the hose slightly to slide it more easily over the connectors. Use suitable hose clips to ensure an airtight seal. After fitting, check that the hose does not kink anywhere or touch hot engine components.
Compatibility
Specific to vehicles with modified 24V configuration where the air filter was relocated. Not compatible with standard 6V or 12V configurations with original air filter position on the firewall. Fits Solex carburettors with modified air intake.
Historical context
The 24 volt modification was applied by various armies for improved electrical capacity, particularly on vehicles with heavy radio equipment or other electrical apparatus. The second battery and additional regulator required modification of the air filter configuration.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 10-1513 — Maintenance Manual — only for Willys MB / Ford GPW (1942)
