HARNESS REGULATOR TO DASH 24 VOLTS M201
HO61321
Wiring harness regulator to dash 24 volt
For Hotchkiss M201
Wiring harness for the electrical connection between the voltage regulator in the engine compartment and the dashboard. Specific to the 24-volt system of the Hotchkiss M201, conforming to NATO specifications applied from 1955 onwards on this French licence-built jeep.
|
Voltage 24 volt |
Application Regulator to dashboard |
|
Vehicle Hotchkiss M201 |
Function Regulator-ammeter connection |
Features
- Specific to 24-volt electrical system
- Connects voltage regulator to dashboard instruments
- For Hotchkiss M201 (1955-1967)
- Replacement part for original wiring
- Conforms to NATO 24V specification
★ Correct wiring is essential for a reliably functioning 24-volt charging system on the M201.
Application
For Hotchkiss M201 jeeps (production years 1955-1967). The M201 was built by Hotchkiss in France under licence from Willys-Overland and was fitted with a 24-volt electrical system conforming to NATO specifications, rather than the original 6-volt system of the Willys MB/Ford GPW.
Installation notes
Runs from the voltage regulator (mounted on the firewall or wing in the engine compartment) to the ammeter and possibly the filterette under the dashboard. Ensure correct connection to terminal 'B' of the regulator. The M201 used Marchal or Paris-Rhône regulators with specific connection configuration.
Compatibility
Only suitable for Hotchkiss M201 with original 24-volt system. NOT compatible with 6-volt Willys MB/Ford GPW, 12-volt conversions, or Hotchkiss JH-101/JH-102 civilian models (which had different electrical systems). Early M201s (1955) and later models used the same 24V system.
Historical context
The Hotchkiss M201 was produced from 1955 to 1967 for the French Army. One of the main modifications compared to the original Willys MB was the change to a 24-volt electrical system with dual batteries, conforming to the NATO standard of the time.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 10-1513 — Maintenance Manual — only for Willys MB / Ford GPW (1942)
