FITTING 1/8
WO640038
Fitting 1/8" NPT
For Dana 44 rear axle
Fitting with 1/8" NPT thread for the Dana 44 rear axle. This fitting is used as breather valve or as blanking plug on the axle housing opening. Essential for correct operation and pressure equalisation of the rear axle.
|
Thread 1/8" NPT (National Pipe Thread) |
Application Dana 44 achteras |
|
Function Breather / ontluchtingsventiel of afsluitdop |
Material Metaal |
Features
- 1/8" NPT thread (standard pipe thread)
- Suitable for Dana 44 rear axle
- Can be used as breather fitting or blanking plug
- Replacement part
- Easy to install with standard tools
★ This 1/8" NPT fitting is a standard component for the Dana 44 rear axle as fitted to post-war military and civilian jeeps. Easy to replace during maintenance or overhaul of the rear axle.
Installation notes
The fitting is screwed into a 1/8" NPT thread located in the axle housing of the Dana 44. When fitting, it is recommended to use pipe sealant or PTFE tape for an oil-tight seal. Tighten the fitting hand-tight and give a quarter turn extra with a spanner — do not overtighten to avoid damaging the axle housing.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : GROUP 11 - REAR AXLE CJ2A, GROUP 11 REAR AXLE DANA 44 3B, GROUP 11 REAR AXLE DANA 44 CJ3B
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Alle Willys / Ford / Hotchkiss jeeps | 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971 |