.jpg)
Clamp Stearing Colaumn to Cowl
Steering column to firewall clamp
Lower mounting bracket
Reproduction clamp for mounting the steering column to the firewall. This clamp secures the lower part of the steering column to the dashboard bracket and ensures stable and correct positioning of the steering assembly.
|
Material Geperst staal |
Type Onderste klem |
|
Application CJ-2A, CJ-3A |
Mounting Schutbord naar stuurkolom |
Features
- Reproduction to original specification
- Secures steering column to dashboard bracket
- Mounting holes on 2-7/8 inch (73 mm) centres
- Suitable for standard steering column
★ Essential component for correct positioning and stability of the steering column. Without proper mounting, the steering column may shift, affecting steering control.
Application
Fits Willys CJ-2A (1946-1949) and CJ-3A (1949-1953) with standard steering column. This lower clamp is used in combination with the upper steering column bracket for complete fixation of the steering column to the firewall.
Installation notes
The clamp is mounted at the lower part of the steering column where it passes through the firewall. First attach the clamp loosely, check that the steering column is correctly centred, then tighten the mounting bolts evenly. After installation, verify that the steering column has no lateral play.
Compatibility
Only suitable for standard steering columns as originally fitted to CJ-2A and CJ-3A models. Not compatible with modified or extended steering columns. Works together with the upper steering column bracket (both parts required for complete installation).
Historical context
The steering column on early civilian Willys jeeps was fixed at two points: at the top near the steering wheel and at the bottom by the firewall. This dual mounting system was essential for steering accuracy on unpaved terrain.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : DASHBOARD CJ2A, DASHBOARD CJ3A, SGI BODY DASH CJ3A, PARTS DASHBOARD CJ2A, 09 DASHBOARD CJ3B
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Ford GPW (early) | 1942 |
| Ford GPW | 1942, 1943, 1944, 1945 |
| Hotchkiss M201 (early) | 1956, 1957, 1958, 1959 |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
| CJ series | |
| Jeep CJ-2A | 1945, 1946, 1947, 1948, 1949 |
| Jeep CJ-3A | 1949, 1950, 1951, 1952, 1953 |
| Jeep CJ-3B | 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual CJ2A_PL_1949 — Parts List — only for Willys CJ-2A / CJ-3A (1949)
From the original Technical Manual TM 10-1513 — Maintenance Manual — only for Willys MB / Ford GPW (1942)
