Tankcure Coating (600ml)
Tank Coating 600ml
Two-component epoxy coating for fuel tanks
Professional tank coating based on solvent-free two-component epoxy for treatment of metal fuel tanks. Seals porous seams and small leaks, prevents corrosion and rust formation from the inside. Suitable for tanks with a capacity of 20 to 24 litres.
|
Composition Two-component epoxy (base + hardener) |
Content 600ml (600 grammes) |
|
Suitable Tanks of 20-24 litres |
Application temperature Minimum 20°C |
Features
- Solvent-free epoxy coating
- Excellent petrol and oil resistance
- Seals small leaks and porous seams
- Prevents rust formation from the inside
- Working time approximately 15 minutes at 20°C
- Curing time minimum 7 days at room temperature
- Mixing ratio base/hardener 100:50 by weight
★ This tank coating is specifically developed for restoration of military vehicles and classic jeeps. The coating must be applied after cleaning and derusting the tank for optimal results.
Application
Suitable for treatment of metal fuel tanks. For optimal results, first clean the tank with a degreaser and treat with a rust remover. The 600ml set is sufficient for tanks with a capacity of 20 to 24 litres.
Installation notes
Mix both components thoroughly together. Fill the tank and close the filler opening. Rotate the tank slowly in all directions for 15 minutes so that the coating reaches all points of the interior. Drain excess liquid through the filler opening. Leave the tank open during curing. Minimum application temperature of tank and coating: 20°C. After curing for at least 7 days at room temperature, the tank can be put back into service.
Compatibility
Suitable for metal fuel tanks. Not suitable for tanks with plastic components. Tank must be structurally intact — coating seals small leaks and porous seams, but cannot repair larger damage. For best adhesion, first treat with specific tank cleaner and rust remover.
Historical context
Epoxy tank coatings were developed in the post-war period to enable restoration of aged fuel tanks of military vehicles rather than replacement. The method makes it possible to preserve original tanks during restorations.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : GROUP 03 FUEL SYSTEM 4X4|6X6, FUEL TANK - CJ2A, FUEL TANK - CJ3A, GROUP 03 FUEL TANK M38, FUEL TANK - CJ3B
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Willys MB (early) | 1941, 1942 |
| Willys MB | 1942, 1943, 1944, 1945 |
| Ford GPW (early) | 1942 |
| Ford GPW | 1942, 1943, 1944, 1945 |
| Hotchkiss M201 (early) | 1956, 1957, 1958, 1959 |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
| Willys M38 | 1950, 1951, 1952 |
| Willys M38A1 | 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971 |
| CJ series | |
| Jeep CJ-2A | 1945, 1946, 1947, 1948, 1949 |
| Jeep CJ-3A | 1949, 1950, 1951, 1952, 1953 |
| Jeep CJ-3B | 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
| Jeep CJ-5 | 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983 |
📐 Diagrams & technical drawings
From the original Technical Manual CJ2A_PL_1949 — Parts List — only for Willys CJ-2A / CJ-3A (1949)
From the original Technical Manual TM 10-1513 — Maintenance Manual — only for Willys MB / Ford GPW (1942)
