HOSE FUEL SHORT JEEP LATE MODEL
WITH NO FUEL FILTER ON FEREWALL
MB 1945
CJ MODELS
Fuel hose short - Late model
Flexible fuel line to pump connection
Short flexible fuel hose for late production jeeps, featuring metal-braided rubber construction. Connects the steel fuel line to the fuel pump inlet. Used on vehicles from mid-1945 onwards with direct fuel line routing to pump.
|
Type Flexible hose with reinforcement |
Connection 5/16" inverted flare (2x female) |
|
Application Late model - direct routing |
Reference A-1325L |
Features
- Metal-braided rubber construction for durability
- Two female inverted flare fittings 5/16"
- Suitable for late production with direct fuel line routing
- Connects steel line to fuel pump inlet
- Resistant to petrol and engine heat
★ Correct replacement for late model jeeps with modified fuel line configuration. Essential component for reliable fuel delivery.
Application
For late production jeeps from mid-1945 onwards where the fuel line runs directly along the frame to the fuel pump, without routing via the firewall-mounted filter. Fits vehicles with the modified routing configuration.
Installation notes
Connects between the steel fuel line (from tank) and the mechanical fuel pump inlet. Ensure correct positioning of both inverted flare fittings. Check for leaks after installation. Maintain sufficient clearance for engine vibrations.
Compatibility
Specific to late model vehicles with direct fuel line routing. Early model jeeps (until mid-1945) use a different configuration with routing via the firewall-mounted fuel filter and require a different hose. Check the routing on your vehicle before ordering.
Historical context
From mid-1945 onwards, the firewall-mounted fuel filter was gradually phased out and the fuel line ran directly to the pump, with a filter in the tank itself. This modification required a modified short flexible hose.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : Fuel Filter Willys MB Ford GPW M201, FUEL TUBES|GAUGE CJ2A, FUEL TUBES|GAUGE - CJ3A, FUEL TUBES|GAUGE M38, FUEL TUBES|GAUGE - CJ3B
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Willys MB | 1942, 1943, 1944, 1945 |
| Willys M38 | 1950, 1951, 1952 |
| CJ series | |
| Jeep CJ-2A | 1945, 1946, 1947, 1948, 1949 |
| Jeep CJ-3A | 1949, 1950, 1951, 1952, 1953 |
| Jeep CJ-3B | 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual CJ2A_PL_1949 — Parts List — only for Willys CJ-2A / CJ-3A (1949)
From the original Technical Manual TM 10-1513 — Maintenance Manual — only for Willys MB / Ford GPW (1942)
