BULB 6V 40/45 WATTS HEADLIGHT P45
HO60887
Headlamp bulb 6V 40/45 Watt P45T
Replaceable bulb with P45T fitting
Headlamp bulb with P45T fitting for 6 volt electrical systems. This bulb features two filaments for dipped beam (40W) and main beam (45W). Suitable for headlamp units with replaceable bulbs, a modern adaptation compared to the original sealed beam units.
|
Specifications 6V 40/45W |
Fitting P45T (3-pin) |
|
Function Dipped/main beam |
Type Replaceable bulb |
Features
- 6 volt voltage
- 40 watt dipped beam / 45 watt main beam
- P45T fitting with 3 connections
- Dual filament for main and dipped beam
- Replaceable bulb (not sealed beam)
★ This bulb is suitable for headlamp units with P45T fitting. Please note: this is not a sealed beam unit as originally fitted to WWII military jeeps, but a modern alternative with replaceable bulb.
Application
For use in headlamp units with P45T fitting on vehicles with 6V electrical system. Fits the categories: CJ-2A, CJ-3A, M38 and CJ-3B when fitted with European-code headlamp units with replaceable bulbs.
Installation notes
The bulb has a P45T fitting with 3 connection pins: earth, dipped beam and main beam. Ensure the fitting is correctly orientated when installing in the bulb holder. Do not touch the glass with bare hands - use a clean cloth.
Compatibility
IMPORTANT: This is NOT a sealed beam unit. Original WWII and early CJ models used 5¾" sealed beam units. This P45T bulb only fits modified headlamp units with replaceable bulbs (European-code system). Check that your headlamp unit has a P45T bulb holder before ordering.
Historical context
The P45T fitting was developed in Europe as an alternative to sealed beam systems, with the advantage that only the bulb needs replacing rather than the complete unit. This type became popular in restorations and modifications of classic vehicles.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : FRONT ELECTRICITY JEEP CJ2A, FRONT ELECTRICITY JEEP CJ3A, FRONT ELECTRICITY JEEP CJ3B
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Willys MB (early) | 1941, 1942 |
| Willys MB | 1942, 1943, 1944, 1945 |
| CJ series | |
| Jeep CJ-2A | 1945, 1946, 1947, 1948, 1949 |
| Jeep CJ-3A | 1949, 1950, 1951, 1952, 1953 |
📐 Diagrams & technical drawings
From the original Technical Manual CJ2A_PL_1949 — Parts List — only for Willys CJ-2A / CJ-3A (1949)
