BRUSH GENERATOR 24 V (SET OF 2) JEEP
SPR40B11
Dynamo Brush 24V
Set of 2 pieces
Replacement brushes for 24V dynamos as fitted to military jeeps with 24-volt electrical system. These wear parts provide current conduction between the rotating commutator and the stationary connection of the generator. Supplied as a set of 2 pieces.
|
Material Carbon-graphite |
Voltage 24 Volt |
|
Set contents 2 pieces |
Application 24V dynamo |
Features
- Set of 2 brushes for 24V dynamo
- Essential component for current conduction
- Wear part – periodic replacement necessary
- Compatible with waterproof 24V dynamos
- Fixing materials included
★ Brushes are critical wear components in the charging system. Worn brushes lead to poor current conduction, arcing and eventually dynamo failure. Replacement at the first signs of wear prevents damage to the commutator.
Application
For vehicles with 24V electrical system such as the Hotchkiss M201 (1955-1967) and M38/M38A1 jeeps with original 24V configuration or 24V conversion. The 24-volt system was NATO standard for military vehicles and requires specific components that are not interchangeable with 6V or 12V systems.
Installation notes
Check the length of the brushes regularly. Replacement is necessary when the carbon is worn down to 10mm or less. When fitting, observe the correct orientation – each brush must be replaced as it came out to ensure proper seating on the commutator. Clean the commutator thoroughly before installing new brushes. Also check the tension of the pressure springs that hold the brushes against the commutator.
Compatibility
Specifically for 24V dynamos. NOT compatible with 6V or 12V systems as fitted to civilian CJ-2A, CJ-3A or standard Willys MB/Ford GPW. When converting from 24V to 12V system, the complete dynamo must be replaced by a 12V alternator – replacing brushes alone is insufficient.
Historical context
The 24-volt electrical system was standard on post-war military jeeps such as the M38, M38A1 and the French Hotchkiss M201, in accordance with NATO specifications. The waterproof 24V dynamo of the M201 was a French improvement on the original MB design, specifically developed for severe military conditions.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 10-1513 — Maintenance Manual — only for Willys MB / Ford GPW (1942)
