22.jpg)
22_200x200.jpg)
BRUSH STARTER 24 V (SET OF 2) M201
DUC69944
Starter Motor Carbon Brushes 24V – Set of 2
For Ducellier starter motor
Replacement carbon brush set for the 24V Ducellier starter motor. Carbon brushes are wearing parts that must be replaced over time to ensure reliable starting. This set contains two carbon brushes with connecting leads.
|
Material Carbon |
Voltage 24V |
|
Starter motor type Ducellier pre-engaged |
Set contents 2 carbon brushes |
Features
- Set of 2 carbon brushes with connecting leads
- Suitable for Ducellier 24V starter motors
- Replaceable wearing part
- Essential for reliable starting
- Supplied with connecting leads
★ Carbon brushes are consumable items which, when worn, cause reduced starting performance. Regular inspection and timely replacement prevent breakdowns.
Application
These carbon brushes are designed for the Ducellier 24V pre-engaged starter motor as fitted to the Hotchkiss M201. The M201 was produced from 1955 to 1966, initially with 6V electrical system, later with 24V (particularly for French Army radio jeeps with suppressed ignition system).
Installation notes
Remove the starter motor from the vehicle and dismantle the end cover. Check the length of the old carbon brushes – replace if heavily worn or shorter than minimum length. Ensure correct positioning of the springs when fitting the new carbon brushes. Also check the condition of the commutator – clean if necessary with fine abrasive paper. Test the starter motor after assembly.
Compatibility
Specific to Ducellier 24V starter motors. NOT compatible with 6V systems or 12V conversions. The Hotchkiss M201 had either a 6V or 24V electrical system depending on year and variant – therefore always check your vehicle's voltage before ordering.
Historical context
The Hotchkiss M201 was the French licence-built version of the Willys MB, produced for the French Army. The later 24V variants used Ducellier electrical components, including a robust pre-engaged starter motor – reliable but requiring regular carbon brush replacement as maintenance.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 10-1513 — Maintenance Manual — only for Willys MB / Ford GPW (1942)
