BUSHING COUNTER GEARS T84
WOA878
Bushings for cluster countershaft gears T84 gearbox (set of 2)
Bronze bearing bushings for cluster countershaft gear - Willys MB / Ford GPW
High-quality bronze bushings for the cluster gear of the T84 gearbox. These bushings are pressed into both ends of the cluster gear and are essential for correct operation and service life of the transmission. Suitable for Willys MB, Ford GPW and early civilian Jeeps with T84 transmission.
Type Bronze bearing bushings (floating type) | Application T84 gearbox countershaft gear |
Vehicle Willys MB, Ford GPW, M201 | Original no. WOA878 / A878 |
Features
- Bronze construction for optimum wear resistance and lubrication Supplied as set of 2 pieces (front and rear of cluster gear) Fitted with central bore for spacer Essential component during T84 gearbox overhaul Original specification per TM 9-1803B
★ These bushings are fitted between the countershaft and the cluster gear and play a crucial role in oil supply via the 'mickey mouse' cutouts in the thrust washers. When replacing, always check the thrust washers for wear and adjust the end play correctly between 0.004" and 0.016" according to TM 9-1803B specifications.
📖 From the Technical Manual
Mounting
- 1. Remove old bushings from cluster gear (press out from one side) 2. Thoroughly clean bore in cluster gear 3. Press new bushings into both ends of cluster gear 4. Place spacer between both bushings 5. Check cluster gear end play after assembly (0.004"-0.016")
Specifications
- Bushing ID: approximately 0.625" (front) to 0.634" (rear) Countershaft OD: 0.619" Cluster gear end play: 0.004" - 0.016" (TM 9-1803B) Service limit end play: 0.016" (TM 9-1803B, page 98)
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Willys MB (early) | 1941, 1942 |
| Willys MB | 1942, 1943, 1944, 1945 |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-1803B — Ordnance Maintenance — Power Train, Body & Frame — only for Willys MB / Ford GPW (¼-ton 4×4)
