BOLTS GEAR HOUSING TO FRAME
5⁄16 18TR NC 1" Q4 Hex
Steering box to frame bolts
Set of 2 pieces
Original specification mounting bolts for fitting the steering box to the chassis. These bolts ensure a solid and correct attachment of the steering box to the frame rails, essential for safe and reliable steering performance.
|
Specification 7/16-20 NF |
Length 3 inch (76 mm) |
|
Set contents 2 bolts |
Type Hex head |
Features
- 7/16-20 NF thread (fine)
- 3 inch length
- Hexagon head
- Set of 2 pieces
- Original specification per WO639120
★ Manufactured to original military specifications for correct fitting and secure attachment of the steering box.
Installation notes
When fitting or refitting the steering box: torque the bolts to 45-55 lb-ft (6.2-7.6 kg-m) according to the service manual. Ensure the steering box is correctly aligned before final tightening of the bolts. Loose bolts can enlarge the holes and cause dangerous play in the steering system.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : BOLTS 14 STEERING
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Willys MB (early) | 1941, 1942 |
| Willys MB | 1942, 1943, 1944, 1945 |
| Hotchkiss M201 | 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 |