BOLT SPRING PIVOT LONG
< 103 MM >
Long spring shackle pin
For torque reaction spring, upper
Long spring shackle pin for the upper mounting of the torque reaction spring to the left front spring. This component was used on military jeeps to stabilise the spring during heavy braking manoeuvres and is an essential element of the original front suspension system.
|
Type Torque reaction spring bolt, upper (long) |
Part number A-6075 |
|
Position Left front spring, upper mounting |
Function Torque reaction spring mounting to spring shackle |
Features
- Long version for upper mounting
- Original dimensions to specification
- Hardened steel for durability
- Essential for correct braking operation
- Used with A-6074 (short/medium bolt)
★ Reproduction to original specifications for authentic restorations.
Application
The torque reaction spring was fitted to the left front spring of military jeeps to stabilise the spring during braking. This long pin connects the torque reaction spring to the upper spring shackle. Used in combination with the A-6074 (lower, shorter bolt).
Installation notes
This long pin is used for the upper mounting of the torque reaction spring bracket to the spring shackle. The short pin (A-6074) is for the lower mounting. Fit with proper lubrication and ensure the pin passes fully through the bushings. Tighten to correct torque to prevent binding.
Compatibility
Specific to jeeps fitted with torque reaction spring on the left front spring. Not all WWII jeeps had this system installed. Check whether your vehicle has the original torque reaction spring bracket. This pin does NOT fit standard spring shackles without torque reaction spring.
Historical context
The torque reaction spring was fitted to WWII jeeps to reduce the tendency to pull left during hard braking, caused by the asymmetric mounting of the brake system on the drum.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Willys MB (early) | 1941, 1942 |
| Willys MB | 1942, 1943, 1944, 1945 |