BRACKET AIR ELBOW CARBURETOR CARTER DODGE
Carburettor Air Horn Support Bracket Carter ETW1
For early Dodge WC vehicles
Reproduction of the original support bracket for the air horn of the Carter ETW1 carburettor. This bracket ensures stable mounting of the air horn/inlet tube to the side of the carburettor as fitted to WWII Dodge military vehicles.
|
Type Carburettor support bracket |
Application Carter ETW1 carburettor |
|
Version Early model WC |
Material Steel |
Features
- Reproduction of original design
- For Carter ETW1 side-mount carburettor
- Stable mounting of air horn to carburettor
- Essential for correct carburettor installation
- Suitable for early WC vehicles (1942-1945)
★ Accurate reproduction of the original support bracket — essential for correct and stable installation of the Carter ETW1 carburettor on your WWII Dodge restoration project.
Application
This support bracket is specific to early production Dodge WC 3/4 ton 4x4 vehicles (1942-1945) and WC 1-1/2 ton 6x6 vehicles (1943-1945 early). Please note: late WC models and M37 series use a different version. Check your carburettor type and production year before ordering.
Installation notes
The bracket secures the air horn (air horn/inlet elbow) to the carburettor body and prevents vibrations and movement whilst driving. Install using original bolt specifications and check for correct alignment before finally tightening all fixings.
Compatibility
ONLY for early Dodge WC vehicles with Carter ETW1 carburettor. Late WC models (late 1943-1945) and all M37/M43 vehicles (1951-1968) use a later ETW1 version with different support bracket. Not compatible with early WC models fitted with DTA/DTB Carter carburettors (1/2 ton).
Historical context
The Carter ETW1 was a robust side-mount carburettor specifically developed for military Dodge lorries during WWII. The support bracket was crucial to keep the air horn stable under harsh off-road conditions.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Dodge WC52 weapons carrier (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC53 carryall | 1942, 1943, 1944 |
| Dodge WC54 ambulance | 1942, 1943, 1944 |
| Dodge WC55 gun motor carriage | 1942, 1943 |
| Dodge WC56 command car | 1942, 1943, 1944, 1945 |
| Dodge WC57 command car (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC58 radio command car | 1942, 1943, 1944, 1945 |
| Dodge WC63 6x6 (winch) | 1943, 1944, 1945 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
