CABLE SPEEDOMETER DODGE 6X6

Speedometer cable Dodge 6x6

WC-62 and WC-63

★ Manufactured to original WWII specifications for reliable operation of the speedometer system in these heavy 6x6 personnel carriers.

Application

Suitable for Dodge WC-62 (without winch) and WC-63 (with winch) 1½-tonne 6x6 personnel and cargo lorries, produced from 1943 to 1945. The WC-62/63 were lengthened versions of the WC-51/52, fitted with an additional rear axle for increased load capacity and troop transport (12 men). These vehicles shared many components with the ¾-tonne 4x4 models, but had a longer wheelbase and reinforced chassis.

Installation notes

The cable runs from the rear of the speedometer on the dashboard to the transmission/transfer case. Ensure correct routing of the cable to prevent kinking and wear. During fitting, check that both connections are securely fastened and that the cable can move freely without tension during steering or suspension movement.

Compatibility

This cable is specific to the 6x6 models WC-62 and WC-63. The WC-62/63 had a 2-speed transfer case (1.5:1 reduction), unlike the single-speed transfer case of the ¾-tonne 4x4 models. Whilst many parts are interchangeable between WC-51/52 and WC-62/63, cable lengths differ due to the longer wheelbase of the 6x6 series.

Historical context

The Dodge WC-62 and WC-63 were introduced in 1943 in response to the larger infantry squad strength (from 8 to 12 men). In total, approximately 43,000 examples were built until the end of 1945, primarily deployed in Europe and the Pacific from 1944.