OIL SEAL PTO SHAFT
28,55x50,5x12,59
PTO drive shaft oil seal
For Dodge WC series with winch
Oil seal for the power take-off drive shaft of Dodge WC vehicles equipped with a winch. This seal ensures proper sealing of the PTO drive shaft and prevents transmission oil leakage. Essential component for PTO system maintenance.
|
Material Rubber |
Application PTO-aandrijfas |
|
Type Oliekeerring |
Component Winch-PTO systeem |
Features
- Replacement for original part number CC926155
- Prevents oil leakage at the PTO drive shaft
- Suitable for PTO-driven winch systems
- Essential for correct power take-off maintenance
- Rubber construction for durable sealing
★ High-quality replacement for the original PTO oil seal, necessary for correct operation of the winch system on Dodge WC vehicles.
Application
This oil seal is used on Dodge WC 3/4 ton 4x4 (1942-1945) and WC 1-1/2 ton 6x6 (1943-1945) vehicles equipped with a PTO-driven winch (such as WC-52, WC-57, WC-62, WC-63). The PTO draws its power from the transmission and drives the front winch via a drive shaft. This seal fits on the drive shaft and prevents transmission oil leaks.
Installation notes
Ensure a clean and smooth sealing surface before installing the new oil seal. Do not use hard tools that could damage the seal. Check the shaft for grooves or damage — a damaged shaft will quickly destroy any new seal. Lightly lubricate the seal lip with transmission oil before installation.
Compatibility
Exclusively for Dodge WC vehicles with PTO-driven winch. Not suitable for vehicles without winch or with electric winch. Note: early and late PTO versions may differ — check your existing seal before ordering. This seal is part of the PTO system, not the winch itself.
Historical context
The PTO-driven winch systems on Dodge WC lorries were essential for self-recovery in difficult terrain during WWII. The Braden MU-2 winch with 7,500 lb capacity was driven via a power take-off on the transmission, coupled by a propeller shaft to the front winch.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
