SWITCH STOP LAMP ON MASTER CYLINDER
Brake light switch.
Wartime model with pin connectors
Brake Light Switch on Master Cylinder
Hydraulic type
Hydraulic brake light switch for mounting on the master cylinder or in the brake line. This switch activates the brake lights when brake pressure is applied in the hydraulic system. Suitable for restoration of WWII military vehicles with hydraulic brake systems.
|
Type Hydraulic pressure switch |
Mounting On master cylinder or tee in brake line |
|
Application WWII military vehicles |
Connection Threaded with tapered seal |
Features
- Hydraulically activated brake light switch
- Suitable for 6V and 12V systems
- Mounting on master cylinder or in brake line
- Sealed construction for reliable operation
- Direct replacement for original switch
★ This hydraulic brake light switch is a reliable solution for WWII military vehicles. The switch operates on hydraulic pressure and activates the brake lights as soon as the brake pedal is depressed.
Installation notes
The switch is mounted in a dedicated bore in the master cylinder or in a tee fitting in the brake line near the master cylinder. Please note: after installation, the brake system must be fully bled, including the switch itself. Use clean brake fluid (DOT 3, DOT 4 or DOT 5 depending on the vehicle) and prevent contamination.
Compatibility
This hydraulic switch is suitable for WWII military vehicles with hydraulic brake systems. Ensure the correct thread for your specific master cylinder. Some owners replace the hydraulic switch with a mechanical switch on the brake pedal when experiencing problems with the hydraulic variant.
Historical context
Hydraulic brake light switches were fitted to millions of American military vehicles during WWII. The switch was mounted in the hydraulic brake system and provided a reliable, sealed solution for activating the brake lights.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : GROUP 12-2 BRAKE LINES DODGE
This part fits:
| Model | Years |
|---|---|
| Military jeeps | |
| Alle Willys / Ford / Hotchkiss jeeps | 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971 |
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
