WHEEL CYLINDER RIGHT
Wheel Cylinder Right-Hand 14" (35.6 cm)
Front or Rear
Hydraulic wheel cylinder right-hand for 14" (356 mm) brake drums for Dodge WC-series vehicles. This cylinder is suitable for both front and rear axle right-hand side and is used in the drum brake system. Essential component for correct and safe brake operation.
|
Type Wheel cylinder right-hand |
Brake Drum 14" (356 mm) |
|
Application Front or rear axle right-hand |
Fitting Hydraulic brake system |
Features
- Wheel cylinder right-hand (RH) for 14" brake drums
- Suitable for front and rear axles
- Hydraulic drum brake system
- Direct replacement part
- Precise fit according to original specifications
★ Quality component for the Dodge WC hydraulic brake system. Precisely manufactured to original dimensions for correct fitting and reliable brake operation.
Application
This wheel cylinder is suitable for Dodge WC-series vehicles with 14" brake drums. The 14" brake drums were introduced from the T-211 series (1941-1942) and remained standard on later Dodge WC 3/4 ton 4x4 models (1942-1945), WC 1-1/2 ton 6x6 models (1943-1945), post-war Power Wagon (1946-1968) and M37/M43 vehicles. Note: early 1/2 ton WC-series (T-207) had smaller 11" brake drums and use different wheel cylinders.
Installation notes
The wheel cylinder is fitted inside the brake drum and operates hydraulically to push the brake shoes apart when the brake pedal is depressed. Check before fitting that the cylinder bore is clean and undamaged. Bleed the complete brake system after fitting according to specifications. Always use new rubber seals and gaskets during overhaul.
Compatibility
Fitting location: front or rear axle RIGHT-HAND. Note that left-hand and right-hand wheel cylinders are NOT interchangeable. Wheel cylinders for 14" brakes do NOT fit vehicles with 11" brake drums (early 1/2 ton WC T-207 series). Check the diameter of your brake drums before ordering. The wheel studs on the left-hand side of Dodge WC vehicles have left-hand thread, right-hand side has right-hand thread.
Historical context
The 14" brake drums were introduced from the T-211 models (1941-1942) as an upgrade from the earlier 11" drums, and remained standard on all later Dodge WC 3/4 ton and 1-1/2 ton vehicles throughout the Second World War and also on post-war Power Wagon and M37-series vehicles.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : GROUP 12-2 BRAKE LINES DODGE
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Dodge WC52 weapons carrier (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC53 carryall | 1942, 1943, 1944 |
| Dodge WC54 ambulance | 1942, 1943, 1944 |
| Dodge WC55 gun motor carriage | 1942, 1943 |
| Dodge WC56 command car | 1942, 1943, 1944, 1945 |
| Dodge WC57 command car (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC58 radio command car | 1942, 1943, 1944, 1945 |
| Dodge WC63 6x6 (winch) | 1943, 1944, 1945 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
