PINION DRIVE TRANSMISSION SPEEDOMETER
Speedometer drive gear gearbox
Drive gear for speedometer drive in the gearbox. This gear sits on the output shaft of the transmission and drives the speedometer via a second gear. Essential component for correct speed registration.
|
Application Gearbox |
Function Speedometer drive |
|
Type Drive gear |
Mounting Transmission output shaft |
Features
- Drive gear for speedometer
- Mounting on transmission output shaft
- Works together with driven gear in housing
- Replacement part for wear
- Important for accurate speed display
★ Quality component for accurate speed measurement. The correct number of teeth depends on the axle ratio and tyre size.
Installation notes
The drive gear is mounted on the output shaft of the gearbox. The number of teeth on the drive gear determines, in combination with the driven gear, the ratio for correct speed display. When replacing, axle ratio and tyre size must be taken into account to obtain the correct combination.
Compatibility
The correct number of teeth depends on several factors: transmission type, rear axle gear ratio and tyre diameter. Not all gears are interchangeable between different transmissions. Always check the number of teeth on both the drive gear and the driven gear for correct speedometer operation.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Dodge WC52 weapons carrier (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC53 carryall | 1942, 1943, 1944 |
| Dodge WC54 ambulance | 1942, 1943, 1944 |
| Dodge WC55 gun motor carriage | 1942, 1943 |
| Dodge WC56 command car | 1942, 1943, 1944, 1945 |
| Dodge WC57 command car (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC58 radio command car | 1942, 1943, 1944, 1945 |
| Dodge WC63 6x6 (winch) | 1943, 1944, 1945 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
