BEARING BALL CLUTCH
Clutch Release Bearing
For Dodge WC 4x4 and 6x6
Clutch release bearing (throw-out bearing) for Dodge WC-series vehicles. This essential component ensures clutch disengagement when shifting gears. Suitable for both ¾-ton 4x4 (G-502) and 1½-ton 6x6 (G-507) variants from WWII.
|
Type Clutch release bearing |
Application Dodge WC 4x4 and 6x6 |
|
Ordnance code G-502 / G-507 |
Fitting On clutch release fork |
Features
- Clutch release bearing for Dodge WC-series
- Suitable for 4x4 and 6x6 variants
- Replacement for worn original bearing
- Releases clutch during gear changes
- Essential component for correct clutch operation
★ Clutch release bearing of reliable quality for authentic restoration of Dodge WC vehicles.
Application
This clutch release bearing fits Dodge WC ¾-ton 4x4 vehicles (G-502, 1942-1945) such as WC-51, WC-52, WC-53, WC-54, WC-56, WC-57 and other variants. Also suitable for Dodge WC 1½-ton 6x6 vehicles (G-507, 1943-1945) such as WC-62, WC-63 and related 6x6 models.
Installation notes
The clutch release bearing is fitted to the clutch release fork and moves with the clutch pedal operation. Check before fitting that the carrier is in good condition. Ensure correct adjustment of the clutch free play (approximately 1/16" clearance between bearing and pressure springs). Lightly lubricate the bearing with heat-resistant clutch grease.
Compatibility
Suitable for all Dodge WC variants with standard clutch, both 4x4 (G-502) and 6x6 (G-507). NOT suitable for Willys MB/GPW or GMC CCKW — these use different clutch release bearings with different dimensions. The bearing is supplied separately without carrier.
Historical context
The Dodge WC-series formed the backbone of American light to medium transport capacity in WWII. With more than 337,500 4x4 and 6x6 units produced, these vehicles were indispensable in all theatres of war.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Dodge WC52 weapons carrier (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC53 carryall | 1942, 1943, 1944 |
| Dodge WC54 ambulance | 1942, 1943, 1944 |
| Dodge WC55 gun motor carriage | 1942, 1943 |
| Dodge WC56 command car | 1942, 1943, 1944, 1945 |
| Dodge WC57 command car (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC58 radio command car | 1942, 1943, 1944, 1945 |
| Dodge WC63 6x6 (winch) | 1943, 1944, 1945 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
