HEAD LAMP HOUSING AND RIM DODGE WC
WOA5586US
Headlamp Housing and Ring Dodge WC
Complete with fixing materials
Headlamp housing with ring for WWII Dodge WC-series vehicles. This reproduction includes the housing (shell), mounting ring, mounting bolt, retaining ring and fixing materials. Suitable for restoration of the front electrical installation.
|
Version Housing with ring and hardware |
Type Reproduction |
|
Applications Dodge WC-series |
Set contents Ring, housing, bolt, retaining ring, hardware |
Features
- Complete headlamp housing with ring
- All fixing materials included
- For WWII vehicle restoration
- Sealed beam lamp not included
- Original specifications
★ Quality reproduction to original WWII specifications. Sealed beam lamp unit, fitting and wiring are not included and must be ordered separately.
Application
Suitable for Dodge WC 3/4 ton 4x4 vehicles (1942-1945) and Dodge WC 1-1/2 ton 6x6 vehicles (1943-1945). Fits various WC models such as WC-51, WC-52, WC-56, WC-57 and WC-62/63 6x6 variants.
Installation notes
The housing is mounted to the wing or bracket using the supplied bolt and retaining ring. The ring secures the sealed beam lamp unit in the housing. Lamp, fitting and wiring are not included with this set and must be purchased separately.
Compatibility
This product is specific to the later WC 3/4 ton and 1-1/2 ton models (from 1942-1943). Not suitable for early WC 1/2 ton models (WC-1 through WC-43) which had different headlamp configurations. Note differences between early and late production regarding mounting points.
Historical context
The Dodge WC-series was produced from 1940 to 1945, with over 250,000 units built for the Allied forces. The 3/4 ton 4x4 and 1-1/2 ton 6x6 models formed the backbone of American military mobility during WWII.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Dodge WC51 weapons carrier | 1942, 1943, 1944, 1945 |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
