BLOCK JUNCTION 11 POST DODGE NET
Junction Block 11-Terminal
For Dodge WC Series
Electrical junction block with 11 connection terminals for joining wiring between under-bonnet cabling and instrument panel. Essential component of the 6V electrical system on Dodge WC vehicles.
|
Material Phenolic resin (bakelite-type) |
Number of terminals 11 connections |
|
Application Dodge WC series |
Mounting location Firewall / kick panel |
Features
- 11 brass connection terminals for wiring connections
- Suitable for open cab and closed cab versions
- Connects main loom to instrument panel wiring
- Replacement part for original junction blocks
- Robust phenolic resin material with high insulation value
★ Reproduction of original type junction block as fitted to WWII Dodge WC military vehicles. Ensures orderly and safe distribution of wiring between engine and cab.
Application
For Dodge WC series vehicles (WC series ½ ton, ¾ ton and 1½ ton models). Suitable for both open cab and closed cab versions. The junction block was mounted on the firewall or kick panel and formed the junction point between engine compartment wiring and the instrument panel.
Installation notes
The block is mounted to the firewall or kick panel with fixing screws. Ensure correct connection of the coded wires according to the wiring diagram for your specific WC model. Use dielectric grease on the terminals to prevent corrosion.
Compatibility
Please note: different Dodge WC models may have varying junction block configurations. Early T207 and T211 models (WC1-WC20) did not have a junction block on the firewall. Later T214/T215 models (WC21 onwards) did have junction blocks. Check your original configuration.
Historical context
Dodge WC vehicles used phenolic resin junction blocks to distribute the 6V wiring in an organised manner between different circuits. These junction blocks were a standard solution in WWII military vehicles for reliable electrical connections under harsh conditions.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : electricity dashboard dodge closed, electricity dashboard open cab
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
