CONDENSER DISTRIBUTOR 6/12 VOLTS
WOA1631
Distributor condenser 6/12 volt
Suitable for both 6 and 12 volt systems
Universal condenser for points-type distributor systems. This condenser works on both 6 volt and 12 volt ignition systems and is suitable for original installations or when converting to 12 volt. Essential component to prevent arcing at the contact points and guarantee an optimal spark.
|
Application Points-type distributor |
Voltage 6 volt and 12 volt |
|
Vehicle Dodge WC series |
Type Ignition condenser |
Features
- Suitable for both 6 volt and 12 volt systems
- Universal application on points distributors
- Prevents arcing and point burning
- Essential for correct spark formation
- Usable when converting to 12 volt
★ High-quality condenser suitable for both original 6 volt systems and converted 12 volt installations. Provides protection of the contact points and optimal ignition performance.
Application
Suitable for Dodge WC series vehicles (WC-51, WC-52, WC-62, WC-63 and related models) with points distributor, both in original 6 volt configuration and when converting to 12 volt system.
Installation notes
Attach the condenser to the outside of the distributor and connect the wire to the contact points terminal. Ensure a proper earth connection via the housing. The condenser can also be mounted outside the distributor as long as the wire is correctly connected to the points wire.
Compatibility
This condenser is suitable for all points-type ignition systems, regardless of whether the system is 6 volt or 12 volt. When converting from 6 to 12 volt, the condenser does not need to be replaced - the voltage rating (300-400 volt) is amply sufficient for both systems. However, the correct capacitance value is important for optimal operation.
Historical context
Condensers in distributor systems were standard from the 1940s onwards on all WWII military vehicles with points ignition. They protect the contact points against arcing and extend their service life considerably.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
