KIT REPAIR GENERATOR 6 V
WOA5992KIT
Dynamo Repair Kit 6 V
For 6 volt electrical system
Complete repair kit for overhauling the 6 volt Auto-Lite dynamo (generator) on Dodge WC vehicles from the Second World War. This set contains all essential parts such as brushes, springs, bearings, bushings and fixings to restore the dynamo to optimal condition.
|
Voltage 6 Volt |
Application Auto-Lite dynamo |
|
Vehicle Dodge WC series |
Type Overhaul kit |
Features
- Complete kit for dynamo overhaul
- Includes brushes, bearings and bushings
- Suitable for 6V Auto-Lite dynamos
- For optimal charging performance
- Essential maintenance component
★ Professional repair kit for restoring the original 6 volt dynamo on WWII Dodge military vehicles.
Application
This kit is designed for the 6 volt Auto-Lite dynamos fitted to Dodge WC 1/2 ton (1941-1942), WC 3/4 ton (1942-1945) and WC 1-1/2 ton 6x6 (1943-1945) vehicles. Please note: late-production WC51, WC52 and some WC54 ambulances were equipped with 12 volt systems from late 1944 onwards – check your vehicle before ordering.
Installation notes
For fitting, the dynamo must be removed from the engine. During dismantling, check the condition of the armature and field coil – if there are deep grooves or severe wear, professional overhaul is necessary. Thoroughly clean all contact surfaces before fitting the new parts. After fitting, test the charging voltage with the engine running (should be approximately 7.2-7.4 volts with a fully charged battery).
Compatibility
NOT suitable for 12 volt systems. Various Dodge WC models received a 12V conversion during or after the war – check your voltage regulator and battery to ensure 6V specification. The WC53, WC56, WC57, WC58 and Command Cars often had 12 volt systems as standard from the factory.
Historical context
The 6 volt Auto-Lite dynamos were standard on most Dodge WC vehicles during WWII. The 6 volt system was reliable and sufficient for the military requirements of that time; only later in the war and afterwards was the switch made to 12 volt for radio applications.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
