BUSHING ENGINE CLUTCH PEDAL BRACKET
CC580902
Clutch pedal bracket bush
Dodge WC series
Bronze bush with steel sleeve for the clutch pedal bracket. These wear parts ensure smooth pedal movement and eliminate play in the pedal mounting. Essential component for maintaining correct clutch operation.
|
Material Bronze with steel sleeve |
Part number 580902 |
|
Application Dodge WC 4x4 and 6x6 |
Function Pedal bracket bearing |
Features
- Bronze inner lining with steel outer sleeve
- Replaces worn original bush
- Eliminates pedal play
- Restores smooth pedal movement
- Essential for correct clutch operation
★ High-quality reproduction with bronze inner lining for long-lasting wear resistance and smooth operation.
Application
Suitable for Dodge WC series military vehicles, both 4x4 (WC-51, WC-52, WC-53, WC-54, WC-56, WC-57, WC-58, WC-62, WC-63, etc.) and 6x6 variants (WC-62, WC-63). This bush sits in the pedal shaft bracket and forms the bearing point for the clutch and brake pedal shaft.
Installation notes
The pedal shaft must be removed to replace the bush. During installation, check that the bush is fully pressed straight into the bracket. Lightly grease the bush with high-quality chassis grease for optimal operation. Worn bushes cause pedal play and can lead to uneven pedal movement.
Compatibility
Caution: this is specifically the bush for the pedal bracket (chassis mounting), not the bush in the pedal itself. Both types are regularly confused. Check the part number to avoid mistakes.
Historical context
The Dodge WC series was produced from 1940-1945 and formed the backbone of Allied light and medium transport capacity during WWII. The bronze bushes in the pedal mounting were a standard wear item that required regular replacement during maintenance.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
