WHEEL CYLINDER LEFT
Wheel Cylinder Left 14" Brakes
1-1/4 x 1-3/8" Bore
Left wheel cylinder for Dodge WC series vehicles with 14 inch drum brakes. This wheel cylinder features a dual bore of 1-1/4 x 1-3/8 inch and is an essential component of the hydraulic brake system.
|
Bore diameter 1-1/4 x 1-3/8 inch (31.75 x 34.93 mm) |
Application 14 inch drum brakes |
|
Position Left |
Type Hydraulic wheel cylinder |
Features
- For 14" drum brakes
- Dual bore: 1-1/4 x 1-3/8 inch
- Left-hand version
- Hydraulic brake system
- Replaces original part CC924207
★ High-quality reproduction of the original wheel cylinder, manufactured to military specifications for reliable braking performance.
Application
Dodge WC 1/2 Ton 4x4 (1941-1942, rear only with 14" brakes), Dodge WC 3/4 Ton 4x4 (1942-1945), Dodge WC 1-1/2 Ton 6x6 (1943-1945). From the T-211 models onwards, 14 inch drum brakes were introduced in place of the earlier 11 inch version.
Installation notes
Before fitting, verify that the brake system is completely depressurised. Clean the brake backplate and inspect the brake shoes for wear. Use suitable brake fluid and bleed the system thoroughly after installation. Verify that the bore diameter matches the original specification.
Compatibility
NOT compatible with early WC 1/2 Ton models (T-207) fitted with 11 inch brakes. Only suitable for vehicles with 14 inch drum brakes (from T-211 onwards). Left and right are NOT interchangeable — order the correct side.
Historical context
The Dodge WC series received improved 14 inch drum brakes from the T-211 models (1941) onwards in place of the earlier 11 inch version, which significantly improved braking performance for these heavy military vehicles.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : GROUP 12-2 BRAKE LINES DODGE
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Dodge WC52 weapons carrier (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC53 carryall | 1942, 1943, 1944 |
| Dodge WC54 ambulance | 1942, 1943, 1944 |
| Dodge WC55 gun motor carriage | 1942, 1943 |
| Dodge WC56 command car | 1942, 1943, 1944, 1945 |
| Dodge WC57 command car (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC58 radio command car | 1942, 1943, 1944, 1945 |
| Dodge WC63 6x6 (winch) | 1943, 1944, 1945 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
