PIN PISTON STANDART SIZE T214
CC320031
Piston pin standard size T214
For Dodge 230 ci engine
Piston pin (wrist pin) in standard size for the Dodge T214 engine. Essential component during engine overhaul that connects the piston to the connecting rod. Precisely manufactured to original specifications for optimal fit and durability.
|
Engine Dodge T214 230 ci (3.8L) |
Version Standard size |
|
Application Engine overhaul |
Type Piston pin (wrist pin) |
Features
- Standard size according to original specifications
- For Dodge T214 230 cubic inch engine
- Essential during engine overhaul
- Connects piston to connecting rod
- Sold individually (6 pieces required per engine)
★ Precision component manufactured to original dimensions for the Dodge T214 six-cylinder engine.
Application
For the Dodge T214 230 cubic inch (3.8L) inline six L-head engine as fitted to the Dodge WC-series 3/4-ton 4x4 and 1½-ton 6x6 lorries. This engine was produced from mid-1941 to 1945 and delivered 92 bhp at 3200 rpm.
Installation notes
Piston pins must be fitted with precise dimensional tolerance. Check cylinder bore and piston dimensions before fitting. Use new retaining clips during installation. Heat piston if necessary for fitting according to technical manual. 6 pieces required per engine.
Compatibility
Exclusively for standard cylinder bore. With oversize pistons (.020,.030,.040,.060) different pin sizes may be required — verify piston and pin specifications. Not compatible with later M37 T245 engines without verification of specifications.
Historical context
The Dodge T214 engine was the workhorse of the WC-series lorries during the Second World War. This robust 230 ci six-cylinder L-head engine powered over 340,000 vehicles, from weapon carriers to ambulances, and was renowned for its reliability under all conditions.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Dodge WC52 weapons carrier (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC53 carryall | 1942, 1943, 1944 |
| Dodge WC54 ambulance | 1942, 1943, 1944 |
| Dodge WC55 gun motor carriage | 1942, 1943 |
| Dodge WC56 command car | 1942, 1943, 1944, 1945 |
| Dodge WC57 command car (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC63 6x6 (winch) | 1943, 1944, 1945 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
