PINION ENGINE OIL PUMP T214
Oil pump drive gear T214
For camshaft-driven oil pump
Drive gear for the oil pump of the Dodge T214 engine. This gear is mounted on the camshaft and drives the oil pump gear via an intermediate shaft. Essential component for correct oil pressure and engine lubrication.
|
Application Dodge T214 engine |
Position Camshaft |
|
Function Oil pump drive |
Type Drive gear |
Features
- Replacement gear for T214 engine
- Camshaft-mounted drive gear
- Drives oil pump via intermediate shaft
- Critical component for oil pressure
- Replacement part during engine overhaul
★ Replacement part for the T214 230 cui six-cylinder engine. Always check proper gear alignment according to TM specifications when replacing.
Application
Suitable for Dodge WC-series vehicles equipped with T214 230 cubic inch (3.8 litre) six-cylinder engine, manufactured 1942-1945. These include WC-51, WC-52, WC-54, WC-56, WC-57, WC-62 and WC-63 variants.
Installation notes
The gear must be correctly positioned on the camshaft to ensure proper oil pump timing. During installation, the engine must be at TDC (top dead centre) of cylinder no. The oil pump must be pre-filled with clean oil before fitting. Check oil pressure after installation at idle speed and under load.
Compatibility
Specific to T214 engine. NOT compatible with later T245 (M37) engines which have a different oil pump offset. Note: different versions exist depending on camshaft configuration.
Historical context
The Dodge T214 230 cubic inch six-cylinder was the standard engine in the ¾-ton Dodge WC-series during WWII. The engine produced 92 bhp and was designed for high torque at low revs, with a maximum engine speed of 2500 rpm.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
