VALVE EXHAUST ENGINE DODGE
Engine exhaust valve
For Dodge 6-cylinder engine
Exhaust valve for the 6-cylinder Dodge engine. This valve is an essential component of the engine assembly and ensures correct evacuation of combustion gases. Suitable for restoration and overhaul of military Dodge engines.
|
Material Steel |
Type Exhaust valve |
|
Application Dodge 6-cylinder engine |
Function Combustion gas evacuation |
Features
- Exhaust valve for Dodge engine
- For 6-cylinder engine block
- 45 degree seat angle
- Suitable for engine overhaul kit
- Replacement part for overhaul
★ Essential component for the overhaul kit of the Dodge 6-cylinder engine. During a valve job, all valves are inspected, lapped and replaced if necessary for optimal compression and performance.
Application
This exhaust valve fits the Dodge 6-cylinder engines of the WC-series as used in the 3/4 ton (T214) and 6x6 lorries (T223). The engines had different development stages but used the same overhaul parts for valves, guides and springs.
Installation notes
During installation, check the valve and valve seat for pitting and corrosion. The valve seat should be between 1/16" and 3/32" wide and sit centrally on the valve face. After installation, check the valve clearance according to the technical manual. Dodge engines have solid valve lifters which require adjustment.
Compatibility
Suitable for Dodge T214, T215, T223 engines — these share the same engine block components. Note: the valve guides must be correctly adjusted (exhaust valves: 0.002" - 0.0035" clearance). Use of hardened valve seats for unleaded petrol is recommended.
Historical context
The Dodge WC-series used side valve engines (L-head flathead) of 230 cubic inches which were introduced in August 1941 and produced until August 1945. These robust 6-cylinder engines delivered 92 bhp and were reliable workhorse engines for military vehicles.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
