HOSE RADIATOR SUPERIOR DODGE
Ø 51 MM
20 CM
Upper radiator hose Dodge WC
00" diameter
Upper radiator hose for Dodge WC-series military vehicles. This hose connects the radiator to the engine and is essential for a properly functioning cooling system. Suitable for both 3/4 ton and 1½ ton models.
|
Material Rubber |
Diameter 00" (50.8 mm) |
|
Vehicle Dodge WC 3/4 ton and 1½ ton |
Application Cooling system (radiator to engine) |
Features
- Inside diameter 2.00 inches (50.8 mm)
- Suitable for 3/4 ton and 1½ ton Dodge WC
- Upper radiator hose
- Resistant to coolant and temperature fluctuations
- Replacement part for cooling system
★ Manufactured to original specifications for the Dodge WC cooling system. Compatible with the T-214 engine used in the WC series.
Application
For Dodge WC 3/4 ton models (WC51, WC52, WC53, WC54, WC56, WC57, WC58) and Dodge WC 1½ ton 6x6 models (WC62, WC63). These models were produced from 1942 to 1945 and used the same T-214 engine and cooling system.
Installation notes
Before installation, check that the hose is supple and shows no cracks. Ensure correct positioning without kinks. Use suitable hose clamps at both ends. Replace hose clamps with every new hose installation for optimal sealing.
Compatibility
This 2.00" hose is specific to the upper radiator connection of Dodge WC-series vehicles with T-214 engine. Not compatible with ½ ton Dodge models which had a different cooling system. The 3/4 ton and 1½ ton WC models shared many cooling system components, including radiator and hoses.
Historical context
The Dodge WC series was the most produced light to medium 4x4 and 6x6 lorry during WWII, with over 250,000 units built. The reliable T-214 engine and robust cooling system made these vehicles suitable for deployment in all climates.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Dodge WC52 weapons carrier (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC53 carryall | 1942, 1943, 1944 |
| Dodge WC54 ambulance | 1942, 1943, 1944 |
| Dodge WC55 gun motor carriage | 1942, 1943 |
| Dodge WC56 command car | 1942, 1943, 1944, 1945 |
| Dodge WC57 command car (winch) | 1942, 1943, 1944, 1945 |
| Dodge WC58 radio command car | 1942, 1943, 1944, 1945 |
| Dodge WC63 6x6 (winch) | 1943, 1944, 1945 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
