SHAFT STEERING GEAR W/SECTOR
Sector Shaft Steering Gear
For Dodge WC 3/4 ton and 6x6
Sector shaft for the steering gear of WWII Dodge WC series vehicles. This shaft connects the worm gear in the steering box to the pitman arm and is an essential component of the steering system.
|
Application Dodge WC 3/4 ton and 6x6 |
Period WWII (1942-1945) |
|
Part Number CC921729 |
Function Steering gear sector shaft |
Features
- Sector shaft for Dodge WC steering box
- Component of worm-and-sector steering system
- Connection between worm gear and pitman arm
- Original specification for WWII Dodge WC
- Suitable for 3/4 ton and 6x6 models
★ Original specification sector shaft for the robust Dodge WC series steering gear as used during the Second World War.
Application
This component fits Dodge WC 3/4 ton models (WC-51, WC-52, WC-53, WC-54, WC-56, WC-57, WC-58, WC-59, WC-60) and 1½ ton 6x6 models (WC-62, WC-63) produced between 1942 and 1945. This concerns the second generation Dodge WC series with reinforced chassis and axles.
Installation notes
The sector shaft is installed in the steering box where the toothed sector must engage with the worm gear on the steering column. The splines on the outside receive the pitman arm. Installation requires correct adjustment of bearing preload using shims at the bearing cap. Use new seals during installation.
Compatibility
Please note: this component is specific to the 3/4 ton and 6x6 models (part number CC921729). For the earlier 1/2 ton WC models from 1941-1942, a different component was used (CC567150). Not interchangeable between these series.
Historical context
The Dodge WC series was the workhorse of the Allied armies during WWII. The robust worm-and-sector steering gear was renowned for its reliability under severe conditions and remains a characteristic component of these legendary lorries.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
