WATER PUMP 6 VOLTS DODGE
Water Pump 6 Volt
For Dodge WC Series
Replacement water pump for Dodge WC series military vehicles with 6 volt electrical system. This pump ensures circulation of coolant through the engine system and is an essential component of the cooling system.
|
Application Dodge WC series |
Voltage 6 Volt system |
|
Engine T214 / T223 230ci |
Type Mechanical water pump |
Features
- Replacement water pump for Dodge WC cooling system
- Suitable for 6 volt electrical installation
- For use with T214 and T223 engines
- Fitted with mounting points for grease nipple
- Includes connection for bypass system
★ This water pump is a direct replacement for the original part on Dodge WC series vehicles. Suitable for various WC models from the period 1941-1945.
Application
This water pump is suitable for Dodge WC series vehicles (T214 and related series) with 6 volt electrical system, produced during the period 1941-1945. This includes models such as WC-51, WC-52, WC-53, WC-54, WC-56, WC-57, WC-62, WC-63 and other variants of the 3/4 ton 4x4 and 1-1/2 ton 6x6 series. Also usable on earlier 1/2 ton models (WC-1 to WC-43) provided they are equipped with comparable T-series engine.
Installation notes
When fitting, ensure correct orientation of the bypass connection. The water pump has a grease nipple which must be regularly lubricated with water pump grease (such as Lubriplate 115 or equivalent). Check after fitting for leaks at the gasket to the engine block and the bypass. If necessary, also replace the water distribution tube in the engine block for optimal cooling.
Compatibility
This pump is specific to 6 volt systems. Not usable on later 12 volt variants (such as some Command Car radio trucks) without modification to the electrical system. Fits T214 and T223 engines. Verify that your vehicle has a 6 volt battery (positive earth) before installing this pump.
Historical context
The Dodge WC series was produced from 1940 to 1945 and formed the backbone of Allied light transport capacity during WWII. The T214 series (1942-1945) was equipped with the reliable 230 cubic inch (3.8 litre) six-cylinder side-valve engine with a 6 volt electrical system.
This description was generated automatically. Unsure about fitment? Contact us at info@willys.be.
⚠ Spotted an error in this description? Report it to info@willys.be
This part is intended for the restoration of historic military vehicles. Fitting, aligning, deburring or reworking is part of that work and is inherent to the nature of these goods. Dimensional variation also exists between original vehicles.
Installation requires technical knowledge of the vehicle. Unsure whether this part suits your version? Ask us before purchase at info@willys.be.
ALL_CATEGORIES : DODGE ENGINE BLOK 4X4|6X
This part fits:
| Model | Years |
|---|---|
| Dodge | |
| Alle Dodge WC / M-serie | 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 |
📐 Diagrams & technical drawings
From the original Technical Manual TM 9-808 — Technical Manual — only for Dodge ¾-ton 4×4 (WC series)
